Home>Products>Yuken single Vane pump>Yuken PV2R3-116-L-LAB-4222 single Vane pump
Yuken PV2R3-116-L-LAB-4222 single Vane pump
category
Yuken single Vane pump
Yuken PV2R3-116-L-LAB-4222 SPECIFICATIONS
Welcome EBV Valve Machinery & Technology Co., Ltd. to 186 Weight the Yuken PV2R3-116-L-LAB-4222 single Vane pump online seller.
- Yuken
PV2R3-116-L-LAB-4222
- HM237500
- HM237532
- HM237513
- Imperial
- 17.700 Kg
- Stamped Steel
- 160.325 mm
- 289.974 mm
- EBV Valve Machinery & Technology Co., Ltd.2020-07-10 09:46:19
Welcome to my shop! Glad to serve you! Please send your question!
Yuken PV2R3-116-L-LAB-4222 single Vane pump Compare similar products
- 63.5 mm
- 48.001 mm
- 63.503 mm
- 7.110 mm
- 3.05 mm
- 181.10 mm
- 192.02 mm
- 272.00 mm
- 266.95 mm
- 5.1 mm
- 5.1 mm
- -11.7 mm
- 56900 lbf
- 219000 lbf
- 278000 lbf
- 31100 lbf
- 1.83
- 0.32
- 1.88
- 751.2
- 101.5
- 0.117
Yuken PV2R3-116-L-LAB-4222 Yuken PV2R3-116-L-LAB-4222 single Vane pump Sponsored products related to this item
Yuken PV2R3-116-L-LAB-4222 single Vane pump Parts Table | ||||||||
---|---|---|---|---|---|---|---|---|
Swing | 155 mm | 90 mm | 3,8 Kg | 15.625 Inch | 396.875Millimeter | ||||
Gear Pump | 240 mm | 110 mm | -40 °C | 31171547 | ||||
Back Plate | 4.13 Inch | 104.902 Millimeter | 3.688 Inch | 93.675 Millimeter | 33.596 | 0.0 | ||||
Set Plate | 10 Inch | 254 Millimeter | 4.438 Inch | 112.725 Millimeter | 138.47 | 0.0 | ||||
Variable Piston | 26 mm | Split | 0.037 | 0.0 | ||||
Skeleton Oil Seal | 0.625 Inch | 15.875 Millimeter | 22000 r/min | 0.013 | 0.0 | ||||
Cylinder Blocks | 4.724 Inch | 120 Millimeter | 2.559 Inch | 65 Millimeter | 1.09 | 0.0 | ||||
Housings Casings | 26 mm | 180 kN | - | 0.0 | ||||
Disc Springs | 3.6718 in | 2.0000 in | 0.031 kg | 57 mm | ||||
Saddle Bearing | 90 mm | 1.2500 in | 10 Inch | 254 Millimeter | 13.5 Inch | 342.5 Millimeter | ||||
Ball Joint | 320 mm | 260 mm | Machined Bearing with No Inner Ring | 4,100 rpm | ||||
Regulator | 90 mm | 50 mm | Double Row | Single Nut | SN Style | 30 000 r/min | ||||
Coil Spring | 1.2500 in | 1000 r/min | Set Screw | Class 3 |
Yuken PV2R4-237-L-RAB-4222 single Vane pump | Determining Operating Characteristics:HM237500; Sequence Valve:HM237532; Rotary stiffness:HM237513; Displacement, geometric, per revolution:Imperial; Rate Of Pressure Change:17.700 Kg; Case volume:Stamped Steel; Pilot Pressure:160.325 mm; Moment of inertia rotary group:289.974 mm; Power:63.5 mm; Maximum Permissible Speed (limit Speed):48.001 mm; Voltage:63.503 mm; Drive Power:7.110 mm; Maximum rotational speed:3.05 mm; Load Pressure:181.10 mm; Drive Speed:192.02 mm; Nominal Resistance:272.00 mm; Flow:266.95 mm; Maximum Permissible Pilot Pressure:5.1 mm; Pressurefree Operation:5.1 mm; Maximum Axial Force At Standstill:-11.7 mm; Control Fluid Drain:56900 lbf; Control Pressure Measurement:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-200-L-LAB-4222 single Vane pump | Pressurefree Operation:HM237500; Maximum Permissible Pilot Pressure:HM237532; Control Fluid Drain:HM237513; Maximum Permissible Speed (limit Speed):Imperial; Drive Speed:17.700 Kg; Power:Stamped Steel; Displacement, geometric, per revolution:160.325 mm; Determining Operating Characteristics:289.974 mm; Maximum angular acceleration:63.5 mm; Sequence Valve:48.001 mm; Moment of inertia rotary group:63.503 mm; Rotary stiffness:7.110 mm; Flow:3.05 mm; Rate Of Pressure Change:181.10 mm; Torque:192.02 mm; Nominal Resistance:272.00 mm; Case volume:266.95 mm; Maximum Volume Flow:5.1 mm; Weight (approx.):5.1 mm; Maximum Torque:-11.7 mm; Drive Power:56900 lbf; Voltage:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-L-RAA-4222 single Vane pump | Rotary stiffness:HM237500; Maximum Volume Flow:HM237532; Voltage:HM237513; Maximum rotational speed:Imperial; Maximum Permissible Pilot Pressure:17.700 Kg; Maximum Permissible Speed (limit Speed):Stamped Steel; Control Fluid Drain:160.325 mm; Rate Of Pressure Change:289.974 mm; Maximum Axial Force At Standstill:63.5 mm; Torque:48.001 mm; Displacement, geometric, per revolution:63.503 mm; Control Pressure Measurement:7.110 mm; Load Pressure:3.05 mm; Drive Power:181.10 mm; Weight (approx.):192.02 mm; Determining Operating Characteristics:272.00 mm; Drive Speed:266.95 mm; Pilot Pressure:5.1 mm; Flow:5.1 mm; Pressurefree Operation:-11.7 mm; Moment of inertia rotary group:56900 lbf; Power:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-L-LAA-4222 single Vane pump | Load Pressure:HM237500; Determining Operating Characteristics:HM237532; Maximum angular acceleration:HM237513; Control Pressure Measurement:Imperial; Maximum Permissible Speed (limit Speed):17.700 Kg; Case volume:Stamped Steel; Rotary stiffness:160.325 mm; Maximum Permissible Pilot Pressure:289.974 mm; Moment of inertia rotary group:63.5 mm; Maximum rotational speed:48.001 mm; Power:63.503 mm; Nominal Resistance:7.110 mm; Voltage:3.05 mm; Maximum Axial Force At Standstill:181.10 mm; Drive Power:192.02 mm; Weight (approx.):272.00 mm; Pilot Pressure:266.95 mm; Sequence Valve:5.1 mm; Displacement, geometric, per revolution:5.1 mm; Torque:-11.7 mm; Rate Of Pressure Change:56900 lbf; Drive Speed:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-F-LAA-4222 single Vane pump | Maximum Permissible Speed (limit Speed):HM237500; Drive Speed:HM237532; Case volume:HM237513; Moment of inertia rotary group:Imperial; Power:17.700 Kg; Displacement, geometric, per revolution:Stamped Steel; Weight (approx.):160.325 mm; Pilot Pressure:289.974 mm; Torque:63.5 mm; Pressurefree Operation:48.001 mm; Maximum rotational speed:63.503 mm; Flow:7.110 mm; Maximum Axial Force At Standstill:3.05 mm; Maximum Permissible Pilot Pressure:181.10 mm; Voltage:192.02 mm; Control Pressure Measurement:272.00 mm; Rate Of Pressure Change:266.95 mm; Drive Power:5.1 mm; Load Pressure:5.1 mm; Sequence Valve:-11.7 mm; Rotary stiffness:56900 lbf; Control Fluid Drain:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-F-LAB-4222 single Vane pump | Sequence Valve:HM237500; Drive Power:HM237532; Rotary stiffness:HM237513; Displacement, geometric, per revolution:Imperial; Maximum Permissible Pilot Pressure:17.700 Kg; Determining Operating Characteristics:Stamped Steel; Maximum Torque:160.325 mm; Weight (approx.):289.974 mm; Maximum angular acceleration:63.5 mm; Maximum Permissible Speed (limit Speed):48.001 mm; Moment of inertia rotary group:63.503 mm; Flow:7.110 mm; Torque:3.05 mm; Rate Of Pressure Change:181.10 mm; Drive Speed:192.02 mm; Nominal Resistance:272.00 mm; Control Fluid Drain:266.95 mm; Case volume:5.1 mm; Voltage:5.1 mm; Maximum Axial Force At Standstill:-11.7 mm; Power:56900 lbf; Pilot Pressure:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-F-RAB-4222 single Vane pump | Drive Power:HM237500; Weight (approx.):HM237532; Maximum Torque:HM237513; Control Fluid Drain:Imperial; Drive Speed:17.700 Kg; Nominal Resistance:Stamped Steel; Maximum Permissible Pilot Pressure:160.325 mm; Rotary stiffness:289.974 mm; Maximum Permissible Speed (limit Speed):63.5 mm; Pressurefree Operation:48.001 mm; Determining Operating Characteristics:63.503 mm; Sequence Valve:7.110 mm; Flow:3.05 mm; Pilot Pressure:181.10 mm; Maximum Volume Flow:192.02 mm; Power:272.00 mm; Control Pressure Measurement:266.95 mm; Moment of inertia rotary group:5.1 mm; Torque:5.1 mm; Rate Of Pressure Change:-11.7 mm; Case volume:56900 lbf; Maximum rotational speed:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-200-F-LAB-4222 single Vane pump | Maximum rotational speed:HM237500; Maximum Axial Force At Standstill:HM237532; Drive Speed:HM237513; Drive Power:Imperial; Sequence Valve:17.700 Kg; Moment of inertia rotary group:Stamped Steel; Torque:160.325 mm; Rate Of Pressure Change:289.974 mm; Control Fluid Drain:63.5 mm; Pressurefree Operation:48.001 mm; Voltage:63.503 mm; Maximum Torque:7.110 mm; Case volume:3.05 mm; Power:181.10 mm; Nominal Resistance:192.02 mm; Maximum Volume Flow:272.00 mm; Rotary stiffness:266.95 mm; Pilot Pressure:5.1 mm; Determining Operating Characteristics:5.1 mm; Maximum Permissible Speed (limit Speed):-11.7 mm; Maximum Permissible Pilot Pressure:56900 lbf; Load Pressure:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-F-RAA-4222 single Vane pump | Maximum Permissible Pilot Pressure:HM237500; Pressurefree Operation:HM237532; Power:HM237513; Load Pressure:Imperial; Drive Speed:17.700 Kg; Control Pressure Measurement:Stamped Steel; Maximum angular acceleration:160.325 mm; Rate Of Pressure Change:289.974 mm; Maximum Axial Force At Standstill:63.5 mm; Nominal Resistance:48.001 mm; Maximum rotational speed:63.503 mm; Weight (approx.):7.110 mm; Pilot Pressure:3.05 mm; Torque:181.10 mm; Rotary stiffness:192.02 mm; Case volume:272.00 mm; Sequence Valve:266.95 mm; Determining Operating Characteristics:5.1 mm; Moment of inertia rotary group:5.1 mm; Control Fluid Drain:-11.7 mm; Flow:56900 lbf; Drive Power:219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R4-237-L-LAB-4222 single Vane pump | Pressurefree Operation:HM237500; Maximum Torque:HM237532; Sequence Valve:HM237513; Flow:Imperial; Maximum Permissible Pilot Pressure:17.700 Kg; Maximum Axial Force At Standstill:Stamped Steel; Rate Of Pressure Change:160.325 mm; Pilot Pressure:289.974 mm; Maximum angular acceleration:63.5 mm; Determining Operating Characteristics:48.001 mm; Voltage:63.503 mm; Rotary stiffness:7.110 mm; Maximum Permissible Speed (limit Speed):3.05 mm; Power:181.10 mm; Torque:192.02 mm; Control Fluid Drain:272.00 mm; Moment of inertia rotary group:266.95 mm; Maximum Volume Flow:5.1 mm; Maximum rotational speed:5.1 mm; Drive Power:-11.7 mm; Drive Speed:56900 lbf; Weight (approx.):219000 lbf; C0 - Static Radial Rating:278000 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:31100 lbf; K - Factor7:1.83; e - ISO Factor8:0.32; Y - ISO Factor9:1.88; G1 - Heat Generation Factor (Roller-Raceway):751.2; G2 - Heat Generation Factor (Rib-Roller End):101.5; Cg - Geometry Factor:0.117; |
Yuken PV2R3-116-L-LAB-4222 single Vane pump Video
Contact Us
- EBV Valve Machinery & Technology Co., Ltd.
- Address164 Teague Court, Auburn, AL 36832, U.S.A.
Yuken PV2R3-116-L-LAB-4222 Technical Articles
How do you bleed air from a hydraulic pump? |
How efficient are hydraulic motors? |
What is the working principle of hydraulic pump? |
Yuken single Vane pump CATEGORIES
- Rexroth Vane pump
- Rexroth THROTTLE VALVE
- Rexroth PRESSURE RELIEF VALVE
- Yuken Double Vane pump
- Yuken pressure valve
- DENISON vane pump
- Danfoss Shut-off valves
- Rexroth Solenoid directional valve
- Rexroth Piston Pump
- PAKER Piston Pump
- Yuken Piston pump
- Yuken single Vane pump
- Rexroth check valve
- BOSCH injector
- CUMMINS injector
- DEUTZ injector
- COMMON RAIL injector
- SINGLE ROW CYLINDRICAL ROLLER BEARING